Installation (for Windows)

REP For Windows has been written for the Windows operating system.

REP requires 300Mb of free disc space and will not install unless this is available on your hard disc. This is the only hardware requirement. Any machine which is powerful enough to run Windows is capable of running REP.

REP may have been delivered via e-mail, CD or from our website, www.logicomep.com. If it has been delivered on CD or electronically, it will be a single self-installing executable which can be run directly from your download directory or from within your e-mail package.

After Installation

Before you can run the program, you will need to obtain a licence from us. To do this, start the program. A window will appear with a line:

Program usage not authorised on this machine,

your machine ID is: xxxxxxxx

Fax or e-mail this number to us (use the e-mail, support@logicomep.com). We will send back three numbers and a list of check-boxes to be enabled. Run the program again and enter these numbers into the same screen. Click OK and the program will start.

From time to time, you may be denied entry to the program due to the licensing system detecting a problem:

This can be for a number of reasons:

1 you haven't yet licensed the program on the PC you are using,

2 the licence period has terminated,

3 you've exceeded the allowed number of simultaneous users,

4 you don't have sufficient privileges in the program directory.

(The last two problems usually occur if the program is installed on a network disk. Ask your system manager to contact us if he or she needs any assistance in fixing the problem.)

If you have already received licence codes, fill in the details and click on OK. If not, fax/e-mail the Machine ID to us, QUIT the program and try again when you receive the codes.

If you have received updated licence codes BEFORE your licence has lapsed (for example, to enable extra options or extend your licence period), select 'Env-Licensing' from the REP blue screen menu then enter the details and click OK.

If the licensing window reappears with a 'too many users' error, just click CANCEL and you should be allowed back into the program. If not, click on QUIT and rerun the program.